Scan
Add WeChat
HVCP5000P-S、HVCP5000P-1S、HVCP5000P-2S
Specially developed for high aspect ratio, ATE board characteristics.
|
|
Descriptions
Specially developed and designed for ultra-high aspect ratio characteristic boards, using the vacuum principle to realise the conductive and non-conductive resin Paste hole plugging process, suitable for the whole board plugging process of multiple types of holes on the same board surface, and can be applied to resins, silver paste, copper paste and conductive adhesives and other materials.
Features
★Can be produce the high aspect ratio panels(70:1).
★High vacuum up to ≤100pa .
★Flexibility to realise: through holes, blind holes on one or both sides, back drilled holes, etc. on the same board surface.
★Ideal for small quantities and a wide range of gauges, no fixtures or air guides are required for hole plugging.
★The operating interface is automated, user-friendly and easy to operate.
Product Specifications
Machine Size | 4381*1152*2512mm(two pumps) |
Max.Aspect Ratio | through holes：70:1 blind holes：1:1（Max） |
Vacuum | ≤100pa（Atmospheric Pressure） |
Panel Thickness | 0.2-8.0mm |
Panel Size | 10inch*10inch（250*250mm）-26inch*34inch(660*863mm) |
Plugging method | Full plate plugging holes (top to bottom) |
Plugging speed | 2-80mm/sec(adjustable） |
Plugging Hole Pressure | 0-6bar（adjustable） |
Diameter of plugging holes | Through hole: 0.1-1.0mm (hole diameter after plating) Blind hole: 0.1-1.0mm (hole diameter after plating) |
Noise (normal operation) | ≦75dB |
Paste Pressure | Cylinder push force: 0-6bar (adjustable) Pneumatic push force: 0-6bar (normal use does not exceed 3bar) |
Plugging holes and plate edge spacing | Hole distance from plate edge≥15mm |
Operation panel | Touchscreen operation |
Protection device | Safety light curtain, emergency stops |
Paste Addition Methods | Single paste Clip Replacement |
Failure rate | ≦1/400h（Failure time/equipment uptime） |
Height of operating table | 1000±100mm |
Scraper speed | 5-200mm/sec（adjustable） |
Scraper pressure | 0-6bar（adjustable） |
Production Capacity
Capacity is affected by aspect ratio (board thickness, aperture diameter), paste viscosity. | Capacity | Aspect ratio | No. of plugging hole cutters |
Capacity per hour | 20-70 | max：70:1 | 1-6 |
Communal Requirement
Electrical requirements | |
Electric | Three-phase five-wire 380V |
Pressure of compressed air | ≧6.5bar |
Power (output) | 13.25KW |
With pumping station exhaust volume | 450m3/h（interfaces：φ200mm） |
Compressed air consumption | 0.12m3/h（interfaces：φ10mm） |
Recommended space around machine | 800mm |
Weight of machine | 2850KG |
Equipment installation environment (temperature, humidity and dust-free requirements) | A. Environmental requirements: clean room, 100,000 level↑. B. Temperature requirement: 22±2℃. C. Humidity requirements: 50±5% |
